|
##GENERIC
-- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook
section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always
see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/)
for the
# latest information.
#
# An exhaustive list of options and more detailed explanations
of the
# device lines is also present in the ./LINT configuration
file. If you are
# in doubt as to the purpose or necessity of a line, check
first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.43 2002/05/23
17:04:01 obrien Exp $
machine i386
#cpu I386_CPU
← ★ 自分のマシンで動いているCPUのみを選択して、その他はコメントする。
#cpu I486_CPU
← ★ ここでは、Pentium100MHｚを使っているのでI586を選択。
cpu I586_CPU
#cpu I686_CPU
← ★
これも不要なためコメント
ident MYKERNEL
← ★ 新しいカーネルの名前に置き換える（カーネル名をMYKERNELにしたとき）。
maxusers 32
#Max Users32
← ★ MaxUser32位にする。
#makeoptions DEBUG=-g
#Build kernel with gdb(1) debug symbols
#options MATH_EMULATE #Support
for x87 emulation ← ★ 最近のCPUにはFEPが内蔵されているので必要ないからコメントする。
options INET
#InterNETworking
options NET6
#IPv6 communications protocols
options FFS
#Berkeley Fast Filesystem
options FFS_ROOT
#FFS usable as root device [keep this!]
options SOFTUPDATES
#Enable FFS soft updates support
options UFS_DIRHASH
#Improve performance on big directories
#options MFS
#Memory Filesystem ← ★ MFSは使わないのでコメントする。
options MD_ROOT
#MD is a potential root device
#options NFS
#Network Filesystem ← ★ NFSを使わなければ必要ないので2行コメントする。
#options NFS_ROOT #NFS usable as root device, NFS
required ← ★ 同上
options MSDOSFS
#MSDOS Filesystem
options CD9660
#ISO 9660 Filesystem
options CD9660_ROOT
#CD-ROM usable as root, CD9660 required
options PROCFS
#Process filesystem
options COMPAT_43
#Compatible with BSD 4.3 [KEEP THIS!]
#options SCSI_DELAY=15000 #Delay
(in ms) before probing SCSI ← ★ これは、コメントした方が起動が早くなるようです。
options UCONSOLE
#Allow users to grab the console
options USERCONFIG
#boot -c editor
options VISUAL_USERCONFIG
#visual boot -c editor
options KTRACE
#ktrace(1) support
options SYSVSHM
#SYSV-style shared memory
options SYSVMSG
#SYSV-style message queues
options SYSVSEM
#SYSV-style semaphores
options P1003_1B
#Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM
#Rate limit bad replies
options KBD_INSTALL_CDEV
# install a CDEV entry in /dev
options IPFIREWALL
#natd ← ★ IPFW natdを使うならコメントアウトもしくは追加
options IPDIVERT #natd ← ★ IPFW
natdを使うならコメントアウトもしくは追加
# To make an SMP kernel,
the next two are needed
#options SMP
# Symmetric MultiProcessor Kernel
#options APIC_IO
# Symmetric (APIC) I/O
device isa
#device eisa ← ★ eisaは今となっては不要なのでコメント。
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
#device fd1 at fdc0 drive
1 ← ★ 通常フロッピーディスクは１個しかついてないのでコメント。
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA
floppy,
# don't use the above line for fdc0 but the following one:
#device fdc0
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk
# ATA disk drives
device atapicd
# ATAPI CDROM drives
#device atapifd
# ATAPI floppy drives ← ★ IDE Floppyは殆ど無いと思うのでコメント。
#device atapist
# ATAPI tape drives ← ★ TAPEドライブを使わなければコメント。
options ATA_STATIC_ID
#Static device numbering
#
SCSI Controllers ← ★ SCSI
I/Fが無い場合は、以降コメント。
#device ahb
# EISA AHA1742 family ← ★
#device ahc
# AHA2940 and onboard AIC7xxx devices ← ★
#device amd
# AMD 53C974 (Tekram DC-390(T)) ← ★
#device isp
# Qlogic family ← ★
#device ncr
# NCR/Symbios Logic ← ★
#device sym
# NCR/Symbios Logic (newer chipsets) ← ★
#options SYM_SETUP_LP_PROBE_MAP=0x40
# Allow ncr to attach legacy NCR devices when
# both sym and ncr are configured
#device adv0 at
isa? ← ★
#device adw ← ★
#device bt0 at isa?
← ★
#device aha0 at isa?
← ★
#device aic0 at isa?
← ★
#device ncv
# NCR 53C500 ← ★
#device nsp
# Workbit Ninja SCSI-3 ← ★
#device stg
# TMC 18C30/18C50 ← ★
# SCSI peripherals
#device scbus
# SCSI bus (required) ← ★
#device da
# Direct Access (disks) ← ★
#device sa
# Sequential Access (tape etc) ← ★
#device cd
# CD
← ★
#device pass
# Passthrough device (direct SCSI access)
← ★
# RAID controllers interfaced
to the SCSI subsystem
← ★ SCSI RAIDを使ってなければ以降コメント。
#device asr # DPT SmartRAID V, VI and Adaptec
SCSI RAID ← ★
#device dpt # DPT Smartcache - See LINT for options! ← ★
#device iir # Intel Integrated RAID
← ★
#device mly # Mylex AcceleRAID/eXtremeRAID ← ★
#device ciss # Compaq SmartRAID 5* series ← ★
# RAID controllers
#device aac # Adaptec FSA RAID, Dell PERC2/PERC3 ← ★
#device aacp # SCSI passthrough for aac (requires
CAM) ← ★
#device ida # Compaq Smart RAID
← ★
#device amr # AMI MegaRAID ← ★
#device mlx # Mylex DAC960 family
← ★
#device twe # 3ware Escalade
← ★
# atkbdc0 controls both
the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
#pseudo-device splash ← ★ Xを使わなければ不要なのでコメント。
# syscons is the default
console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Enable this and PCVT_FREEBSD
for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a
vt console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the
rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Floating point support
- do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support
(see LINT for more options)
#device apm0 at nexus? disable
flags 0x20 # Advanced Power Management ← ★ APMを使わなければコメント。
# PCCARD (PCMCIA) support
device card
device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000
disable
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
#device sio2 at isa? disable
port IO_COM3 irq 5 ← ★ シリアルポートは、通常COM2までなのでコメント。
#device sio3 at isa? disable port IO_COM4 irq 9
← ★ 同上
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
#device plip # TCP/IP
over parallel ← ★ 不要なデバイスなのでコメント
#device ppi # Parallel port interface device
← ★ 同上
#device vpo # Requires scbus and da ← ★ 同上
# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 adapter Gigabit Ethernet
Card (``Wiseman'')
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that
use the common MII bus controller code.
# NOTE: Be sure to keep the 'device
miibus' line in order to use these NICs! ← ★ 以降では、本来このホストで使うNIC以外はコメントしてかまわない。しかし、わからない人はこのままにしておく方が間違いは無い。
device miibus # MII bus support
device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557,
82558)
device pcn # AMD Am79C97x PCI 10/100 NICs
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS
7016
device ste # Sundance ST201 (D-Link DFE-550TX)
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
device bge # Broadcom BCM570x (``Tigon III'')
# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
device ed0 at isa? port 0x280 irq 10 iomem 0xd8000
device ex
device ep
device fe0 at isa? port 0x300
# Xircom Ethernet
device xe
# PRISM I IEEE 802.11b wireless NIC.
device awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE
really
# exists only as a PCMCIA device, so there is no ISA attachment
needed
# and resources will always be dynamically assigned by the
pccard code.
device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration
below will
# work for PCMCIA and PCI cards, as well as ISA cards set
to ISA PnP
# mode (the factory default). If you set the switches on
your ISA
# card for a manually chosen I/O address and IRQ, you must
specify
# those parameters here.
device an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
device ie0 at isa? port 0x300 irq 10 iomem 0xd0000
#device le0 at isa? port 0x300 irq 5 iomem 0xd0000
device lnc0 at isa? port 0x280 irq 10 drq 0
device cs0 at isa? port 0x300
device sn0 at isa? port 0x300 irq 10
# Pseudo devices - the number
indicates how many units to allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
#pseudo-device sl 1 # Kernel
SLIP ← ★ シリアルラインは使わないのでコメント
#pseudo-device ppp 1 # Kernel PPP ← ★ 必要ないデバイス
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif # NEED IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device
enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling
this!
pseudo-device bpf #Berkeley packet filter
# USB support
← ★ USBを使ってない場合は全てコメント！
#device uhci # UHCI PCI->USB interface ← ★
#device ohci # OHCI PCI->USB interface ← ★
#device usb # USB Bus (required) ← ★
#device ugen # Generic ← ★
#device uhid # "Human Interface Devices" ← ★
#device ukbd # Keyboard ← ★
#device ulpt # Printer ← ★
#device umass # Disks/Mass storage - Requires scbus
and da ← ★
#device ums # Mouse ← ★
#device uscanner # Scanners ← ★
#device urio # Diamond Rio MP3 Player ← ★
# USB Ethernet, requires mii
#device aue # ADMtek USB ethernet
← ★
#device cue # CATC USB ethernet ← ★
#device kue # Kawasaki LSI USB ethernet ← ★
|
